Antaira Technologies - Industrial Ethernet Switches
LMX-0500-V2 Series Hardware Manual V1.1
1
1. Introduction
All Antaira industrial managed switches come with a pre-
installed “user-friendly” web console
interface, which allows users to easily configure and manage the units, whether one is using a serial
console and Command Line Interface (CLI) commands like Telnet, SSH, HTTP (Web GUI) or Simple
Network Management Protocols (SNMP).
1.1 Product Overview
Antaira Technologies’ LMX-0500-V2 series
is a 5-port industrial managed Ethernet switch that is
embedded with 5*10/100Tx fast Ethernet ports. This series is a fully manageable industrial Ethernet
switch pre-loaded with standard Layer 2 network management software, and supports a user-friendly
web console interface for easy configuration.
The LMX-0500-V2 series is IP30 rated, DIN-rail mountable, and has two wide operating temperature
models for either a standard temperature range (STD: -10°C to 70°C) or an extended temperature
range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial
networking application within factory automation, ITS, power/utility, water wastewater, and any other
outdoor or harsh environment.
Version 2 hardware is compatible with the latest layer 2+ firmware which permits static routes
between VLANs.
1.2 Product Software Features
Network Redundancy
➢
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
➢
Web UI based management, SNMP v1/v2/v3, Serial Console
➢
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, Diffserv
➢
IEEE802.1q VLAN tagging, port-based VLAN support
