ANTAIRA LMX-0500-T-V2, Руководство по оборудованию

Страница: 10 / 19

Antaira Technologies - Industrial Ethernet Switches
LMX-0500-V2 Series Hardware Manual V1.1
6
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in Table 2.1 .
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault
Green
On System is ready
Off System is booting
Red
On
Fault alarm
Off
System is in normal state
Owner Green
On ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring Green
On Ring Network is active
Off
Ring Network is not active
LAN Port 1~5
(Upper LED)
Green
On Connected to network, 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~5
(Lower LED)
Green
On Connected to network, 10/100Mbps
Flashing Networking is active
Off Not connected to network
Table 2.1 - LED Indicators for LMX-0500-V2 Series
Caution: "P1" is the abbreviation for "Power ",
“P2” is for “Power 2”, “LNK” is for “Link”, and
"ACT" is for "Activity".