ANTAIRA LMP-0702G-SFP-24-V2 Series, Руководство по оборудованию

Страница: 11 / 22

Antaira Technologies - Industrial Ethernet Switches
LMP-0702G-SFP-24-V2 Series Hardware Manual V1.0
6
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has
its own specific meaning, see below in Table 2.1 .
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault
Green
On No event happened
Red
Off
1. Power input 1 or 2 is inactive
2. Port link-down / Broken
Master Green
On ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode is not active
Ring Green
On ERPS Ring Network is active
Flashing ERPS Ring Network works abnormally or misconfigure
Off
ERPS Ring Network is not active
SFP Port 6~7
Green:
1000Mbps
Amber:
100Mbps
On Connected to Network, 100/1000Mbps
Flashing Network is active
Off Not connected to network
LAN Port 5
(Upper LED)
Green
On Connected to network, 1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 5
(Lower LED)
Green
On Connected to network, 10/100Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~4
(Upper LED)
Green
On Connected to network, 10/100/1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~4
(Lower LED)
Green
On Supplying power to the powered-device
Off Not connected to a powered-device
Table 2.1 - LED Indicators for LMP-0702G-SFP-24-V2 Series
Note: "P1" is the abbreviation for "Power 1
", “P2” is for “Power 2”, “LNK” is for “Link”, and "ACT" is for
"Activity".