Antaira Technologies - Industrial Ethernet Switches
LMP-0602-XX-V2 Series Hardware Manual V1.0
9
Note:
Only use copper conductors, 60/75
°
C, tighten to 5lbs.
•
The wire gauge for the terminal block should range between 18~20 AWG.
Caution:
•
The wire gauge for the terminal block should range between 12 ~ 24AWG
2.10 Grounding Note
Grounding and wire routing help limit the effects of noise due to Electromagnetic Interference
(EMI). Run the ground connection from the ground screw to the grounding surface prior to
connecting devices. The grounding screw symbol is shown blow in Figure 2.15.
Figure 2.15 - Grounding screw
Caution:
Using a shielded cable achieves better electromagnetic compatibility.
