Antaira Industrial Ethernet Switches
LMP-0601G-SFP Series User Manual V1.1
1
1. Introduction
Antaira Technologies’ industrial managed switches come with a pre-installed “user friendly” web
console interface, which allows users to easily configure and manage the units, whether one is using
a serial console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or
simple network management protocols (SNMP).
1.1 Product Overview
Antaira’s LMP-0601G-SFP series is a 6-port industrial PoE+ Gigabit managed Ethernet switch
that is embedded with five gigabit Ethernet ports, which port #1~4 support either IEEE802.3af or
IEEE802.3at for a maximum of 30 watts per port, and one 100/1000 dual rate SFP slot. It is a fully
manageable industrial Ethernet switch with a pre-loaded Layer 2 network management web
console that supports a low voltage redundant power input range from 48~55VDC with a voltage
booster. This product series is IP30 rated, DIN-rail mountable, and has two wide operating
temperature models for either a standard temperature range ( STD: -10°C to 70°C) or an
extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection
for any industrial networking application within factory automation, ITS, power/utility, water
wastewater, and any other outdoor or harsh environment.
1.2 Product Software Features
Network Redundancy
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
Web UI based management, SNMP v1/v2, Serial Console
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, Diffserv
IEEE802.1q VLAN, port-based VLAN support
IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group
Supports RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, SSH/SSL,
TFTP.
Advanced PoE Ports Management (auto ping check)
Auto powered device (PD) detection
Auto reset (cycle power to unresponsive PD)
