Antaira Industrial Ethernet Switches
LMP-0500 Series User Manual V1.1
1
1. Introduction
All Antaira industrial managed switches come with a pre-installed “user friendly” web console interface,
which allows users to easily configure and manage the units, whether one is using a serial console
and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple network
management protocols (SNMP).
1.1 Product Overview
Antaira’s LMX-0500 series is a 5-Port Industrial Managed Ethernet Switch which embedded
with 5*10/100Tx fast Ethernet ports. This series is a full manageable Industrial Ethernet Switch
pre-loaded with standard Layer 2 network management software, and supports a user friendly
Web Console interface for easy configuration.
LMX-0500 series is IP30 rated and DIN-rail mountable design and provides wide operating
temperature range models in STD: -10°C to 70°C, and EOT: -40°C to 75°C, and it also provided
high EFT and ESD protection for any industrial networking application in factory automation, ITS,
Power/Utility, Water Wastewater Treatment plants, any outdoor or harsh environment.
1.2 Product Software Features
Network Redundancy
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
Web UI based management, SNMP v1/v2, Serial Console
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, Diffserv
IEEE802.1q VLAN, port-based VLAN support
IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group
Supports RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, SSH/SSL,
TFTP.
Port Configuration
Status, statistics, mirroring, rate limiting, event syslog
Event Handling
Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output
All manuals and user guides at all-guides.com
