ANTAIRA APX-110N5, Руководство пользователя

Страница: 20 / 68

20
In this example the workgroup PCs on the Ethernet network connected to the Station
device can access the printer across the wireless connection to the access point where
the printer is connected.
Station WDS Mode
Station WDS mode is similar to Station mode. The difference is Station WDS
must connect to access point configured to Access Point WDS (or RootAP) mode.
Station WDS is mainly use for point-to
–point connection between 2 buildings or
locations as far as several kilometer away.
Repeater WDS Mode
Repeater WDS Mode to mainly to extend the wireless range and coverage of the
wireless network allowing access and communications over places generally difficult
for wireless clients to connect to the network.
In Repeater mode, the access point acts as a relay for network signals on the network
by regenerating the signals it receives, and retransmitting them to main network
infrastructure.
Detailed information on the Repeater mode is available in the Repeater Setup section
.
** Note: Repeater WDS requires the access point to be setup in RootAP or
Access Point WDS mode to work.