8
Industrial Wireless Access Point
Hardware User's Manual
– AMS-2111
2.8 Grounding Note
Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI).
Run the ground connection from the ground screw to the grounding surface prior to connecting devices.
The grounding screw symbol is shown blow in
Figure 2.9
.
Figure 2.9
Grounding screw
Caution:
Using a shielded cable achieves better electromagnetic compatibility.
3. Mounting Installation
3.1 DIN-Rail Mounting
The DIN-Rail is pre-installed on the industrial wireless AP from the factory. If the DIN-Rail is not on the
product, please refer to
Figure 3.1
to learn how to install the DIN-Rail on the product.
Figure 3.1
The Rear Side of the wireless AP and DIN-Rail Bracket
