EN
14
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use.
Save them for future reference.
•
Disconnect from the mains before installation or maintenance.
•
Check that the total voltage in the power circuit, including this lamp, does not
exceed the maximum permitted value.
ELECTRICAL SAFETY
New installations and extensions to existing installations should always be carried out by
an authorised electrician. If you have the necessary experience and knowledge (otherwise
contact electrician), you may replace switches and power points, fit plugs, extension cords
and light sockets. Incorrect installation can result in fatal injury and the risk of fire.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 60 W
Socket E27
Protection rating
IP33
Timing
5 s – 7 min
Detection angle
140°
Detection area, length
7 m
INSTALLATION
The motion detector will not work properly if it is:
– installed near the outlet of a central boiler
– installed near an air conditioning unit
– pointed towards vehicular traffic
– pointed towards reflecting surfaces
– installed where it is exposed to light from other lamps.
NOTE:
To ensure the correct functionality of the sensor the lamp must be installed so that movements
go across the detector.
Operating instructions for
wall lamp with sensor
ENGLISH
