12
Deutsch |
English
| Français | Español
Svenska | Italiano | Nederlands | Portuguese
Deutsch |
English
| Français | Español
Svenska | Italiano | Nederlands | Portuguese
2. Switch the lamp off before charging. For charging, pull the sealing cap off the
micro-USB socket. Connect the USB charger to the lamp by plugging the mic-
ro-USB plug on one end of the USB/micro-USB charge cable into the micro-USB
socket on the lamp and plugging the USB plug on the other end of the charge
cable into the USB socket of the USB charger.
3. Note: Do not active the lamp during charging. Check that the lamp is switched
off after starting the charging process.
LED CHARGE INDICATOR
The charging process is indicated by a red LED. If the rechargeable battery is fully
charged, the LED illuminates green.
CLEANING/MAINTENANCE
§
Clean only with a slightly damp cloth, then rub it dry.
§
Never submerge the product in water or other liquids.
§
Do not allow fluids to enter the housing.
§
Do not use hard brushes or sharp objects for cleaning.
Improper usage of the lamp may result in it being damaged:
§
Do not throw or drop
§
Use only in original condition
§
Do not use while still in packaging
§
Turn off after use
TECHNICAL DATA FOR LAMP
Article no.:
1600-0306
Illuminant:
2W COB-LED | 3W SMD-LED
Input voltage:
5V DC
Input current:
Max. 500mA
Rechargeable battery:
Li-Po-rechargeable battery pack 3.7V |
700mAh | 2.59Wh
Luminous flux:
Main light 230lm 100% | 70lm 30%
Auxiliary LED 135lm
Battery life:
Main light 2h | Auxiliary LED 6.0h
Light range:
ca. Main light 20m | Auxiliary LED 25m
Charge time:
ca. 3h
Protection type:
IP20 / IK07
Storage temperature:
-20C° to 50°C
Operating temperature:
-10C° to 25°C
Weight of light incl. battery pack: 76g
Length of USB cable:
150cm
Dimensions of light:
172 x 26,5 x 25mm
Содержание 1600-0306
Страница 2: ...2 2 1...
Страница 3: ...3 3 5 6 4...
