![Anslut 417061 Скачать руководство пользователя страница 88](http://html1.mh-extra.com/html/anslut/417061/417061_operating-instructions-manual_2945580088.webp)
EN
88
CONTROL PANEL AND DISPLAY
Read these instructions carefully and familiarise yourself with the controls and how they are used. The
appliance can be operated with the remote control or from the control panel.
Option
Option
Option
Fig. 3
1. POWER SWITCH
Starts/stops the appliance.
2. SLEEP/ECO
Used to activate SLEEP/ECO mode.
3. FAN/ION (ION is optional)
Used to set the fan speed. Press repeatedly to switch between LOW, MED, HI and AUTO modes. The status
light indicates the set mode, with the exception of AUTO. In AUTO mode all the status lights are off.
NOTE:
Press the button for 3 seconds to activate ION mode. The ionisation unit is activated and helps to
remove pollen and impurities from the air by trapping them in the filter. Press the button for 3 seconds
again to deactivate ION mode.
4. + and -
Used to increase/reduce the set point temperature in steps of 1°C from 17 to 30 °C, or in steps of 1°F from
62 to 88°F, or to set the TIMER from 0 to 24 h.
NOTE:
The temperature can be shown in °F or °C. To change units, press + and - at the same time for 3
seconds.
5. MODE
Used to select operating mode. Press repeatedly to switch between AUTO, COOL, DRY, FAN and HEAT modes
(not on models that only have cooling). The status light indicates the set mode.
6. TIMER
Used together with the + and - buttons to set start time AUTO ON and stop time AUTO OFF. The status light
indicates the set mode.