ENGLISH
26
Cleaning the air filter
Check and clean the air filter, located inside the front grille, every other week.
1.
Pull out the water tank.
2.
Pull down the filter. Clean the filter with warm soapy water.
NOTE:
Do not wash the filter in a
dishwasher. Rinse and allow to completely dry before fitting.
3.
Insert the filter and press it up.
IMPORTANT:
Never use the appliance without a filter
– dust and impurities will reduce the performance
of the appliance.
When not using the appliance for a prolonged period
1.
Switch off the appliance, and empty the water tank after one
day.
2.
Clean the appliance, the water tank and the air filter.
3.
Wind up the power cord and secure with the strap.
4.
Cover the appliance with a plastic bag.
5.
Store the appliance upright in a dry, well-ventilated area.
TROUBLESHOOTING
Problem
Cause
The appliance will not start.
The power cord is not properly plugged into the mains socket.
A fuse has tripped.
The set target humidity has been reached, or the water tank is full.
The water tank is not properly inserted.
The air is not dehumidifying
properly.
The appliance has not been working long enough.
The air flow to the appliance is blocked by furniture or curtains, etc.
The target humidity is set too high.
Doors, windows or other openings have not been closed.
The room temperature is too low (lower than 5°C).
Something in the room is emitting moisture.
The appliance is noisy.
The air filter is blocked.
The appliance smells.
The floor is not flat.
Frost on the coils.
This is quite normal. The appliance defrosts automatically.
Water on the floor.
Leakage from the hose or connection.
A hose has not been connected, and the rubber plug has not been
inserted.
The power indicator lamp
flashes 5 times per second.
Fault on the humidity or temperature sensor. Unplug and plug in the
power cord again. Contact your dealer if the fault recurs.
