6
SAFETY WARNING
Genuine parts and accessories have been specifically designed and tested for use with these products to ensure
continued product quality and performance. Testing cannot be performed on all parts nor on accessories
sourced from other vendors, incorrect design and/or fabrication of such parts and accessories may adversely
affect the performance and safety features of these products. Failure to properly select, install or use authorised
Sundyne parts and accessories is considered misuse, and damage or failure caused by misuse is not covered by
Sundyne’s warranty. Additionally, modification of Sundyne products or removal of original components may
impair the safety of these products and their effective operation.
EUROPEAN UNION MACHINERY DIRECTIVE
(CE mark system)
This document incorporates information relevant to the Machinery Directive 98/37/EC. It should be read prior
to the use of any of our equipment. Individual maintenance manuals which also conform to the EU Directive
should be read when dealing with specific models.
EUROPEAN UNION ATEX DIRECTIVE
This document incorporates information relevant to the ATEX Directive 94/9/EC (Directive on equipment and
protective systems intended for use in potentially explosive atmospheres). It should be read prior to the use
of any of our equipment.
Compliance to the Directive is based on Atmospheres having pressures up to but not exceeding 350psi and
temperatures ranging from –120
°
F to + 250
°
F depending on the model.
As indicated in the ATEX Directive 94/9/EC, it is the responsibility of the user of the pump to indicate to
Sundyne Corporation the Zone and Corresponding group (Dust or Gas) that the pump is to be installed
within. Should the pump be put into service in a potentially explosive atmosphere, the user of the pump
must put the grounding connector into use.
