Ansel AW-111 Series, Руководство пользователя

Страница: 63 / 84

Network Camera User’s Guide
63/84
holding down more than 3 seconds on the device.
2. Reconfigure the device.
Forgot the IP address of
the device. Check IP address of device by using the IPWizard.exe
program or by UPnP discovery.
IPWizard program
cannot find the device. • Re-power the device if cannot find the unit within 1 minutes.
• Do not connect device over a router. IPWizard program
cannot detect device over a router.
• If IP address is not assigned to the PC which running
IPWizard program, then IPWizard program cannot find
device. Make sure that IP address is assigned to the PC
properly.
• Antivirus software on the PC might interfere with the setup
program. Disable the firewall of the antivirus software during
setting up this device.
• Check the firewall setting of your PC or Notebook.
Internet Explorer does
not seem to work well
with the device
Make sure that your Internet Explorer is version 6.0 or later. If
you are experiencing problems, try upgrading to the latest
version of Microsoft’s Internet Explorer from the Microsoft
webpage.
IPWizard program fails
to save the network
parameters. • Network may have trouble. Confirm the parameters and
connections of the device.
Access this device
Cannot access the login
page and other web
pages of the device from
Internet Explorer
• Maybe the IP Address of the device is already being used
by another device or computer. To confirm this possible
problem, disconnect the device from the network first, and
then run the PING utility to check it out.
• Maybe due to the network cable. Try correcting your
network cable and configuration. Test the network interface
by connecting a local computer to the device via a crossover
cable.
• Make sure the Internet connection and setting is ok.
• Make sure enter the IP address of Internet Explorer is
correct. If the device has a dynamic address, it may have
changed since you last checked it.
• Network congestion may prevent the web page appearing
quickly. Wait for a while.
The IP address and Subnet Mask of the PC and the device
must be in the same class of the private IP address on the
LAN.
• Make sure the http port used by the device, default=80, is
forward to the device’s private IP address.
• The port number assigned in your device might not be
available via Internet. Check your ISP for available port.
• The proxy server may prevent you from connecting directly
to the device, set up not to use the proxy server.
• Confirm that Default Gateway address is correct.
• The router needs Port Forwarding feature. Refer to your
router's manual for details.
• Packet Filtering of the router may prohibit access from an