Ansel AW-111 Series, Руководство пользователя

Страница: 32 / 84

Network Camera User’s Guide
32/84
Key value of WEP.
WPA settings:
- WPA Key:
Key value of WPA. The device uses a pre-shared key (PSK) for key
management. The pre-shared key can be entered either as Manual hex,
as 64 hexadecimal characters, or as a Passphrase, using 8 to 63 ASCII
characters.
Obtain IP address automatically (DHCP):
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically , then you need to enter these
network parameters manually.
Select “OK” to save and enable the setting.
Note : To enable WLAN function, user must set these related parameters correctly at first.
Then power off the device and remove Ethernet cable from device. Power on the device
again and WLAN mode will be available accordingly.
DDNS service
DDNS: Stands for Dynamic Domain Name Server
Your Internet Service Provider (ISP) provides you at least one IP address which you use
to connect to the Internet. The address you get may be static, meaning it never changes,
or dynamic, meaning it’s likely to change periodically. Just how often it changes,
depends on your ISP. A dynamic IP address complicates remote access since you may
not know what your current WAN IP address is when you want to access your device
over the Internet. One of the possible solutions to the dynamic IP address problem
comes in the form of a dynamic DNS service.
A dynamic DNS service is unique because it provides a means of updating your IP
address so that your listing will remain current when your IP address changes. There are
several excellent DDNS services available on the Internet. One such service you can
use is www.DynDNS.org. You’ll need to register with the service and set up the domain
name of your choice to begin using it. Please refer to the home page of the service for
detailed instructions or refer to Appendix G for more information.
If your device is connected to xDSL directly, you might need this feature. However, if
your device is behind a NAT router, you will not need to enable this feature because
your NAT router should take care of this job. As to xDSL environment, most of the users
will use dynamic IP addresses. If users want to set up a web or a FTP server, then the