Anritsu RA773UA Скачать руководство пользователя страница 56

Страница: 56 / 87

mode is entered with the screen in ST'BY state (the scanner-OFF state) and the LCD backlight turned off. This

action is repeatedly executed.

Usage example, set a guard zone and have the warning signal automatically confirmed every prefixed period.

(1) Use the up-down cursor keys to select SLEEP from among the pull-down display items, and press either the

"ENT" key.

(2) When the OFF/5min/10min/15min display has appeared beside the SLEEP item, select a time to be set with the

up-down cursor keys.

(3) Press the "ENT" key and the setting is completed. When the SLEEP function is to be canceled, select OFF in

(2).

When a transmission is conducted after setting a SLEEP mode, a ST'BY state is entered and the backlight turns

off after a 30-second-transmission. (Power-saving mode). Two minutes before the fixed time the backlight turns on

and the 2-minute timer starts. Then, at the fixed time another 30-second-transmission begins. This series of actions

are repeated. If any one key is pressed during the course of this action, the SLEEP function will be canceled.

(a) Setting procedure

eq \x(Up/Down)

eq \x(ENT)

eq \x(Up/Down) ---------------- (Select OFF)

eq \x(ENT)

SLEEP function is turned OFF

(Select SLEEP)

(Select 5min.)-------------------------------------

eq \x(ENT) eq \x(POWER)

30-second-transmission every 5 min.

(Select 10min.)

eq \x(ENT) ------------------------ eq \x(POWER)

30-second-transmission every 10 min.

(Select 15min.)

eq \x(ENT) ------------------------ eq \x(POWER)

30-second-transmission every 15 min.

Transmission

Setting completed

(b) Action after setting

SLEEP setting5min.

Operation

(Under Tx

(Under power-saving mode

2min. timer in use

(Under Tx

(Under power-saving mode
0 sec.

30 sec.

3 min.

5min.

5and a half min.Time used

TX Start

TX OFF

Backlight ON

Tx Start

TxOFF

Action

Countdown start

-- What happens if a key is pressed after a SLEEP mode setting?

If a transmission is conducted and a key is pressed after setting a SLEEP mode, power-saving mode is

entered 30 seconds after key is pressed.

-- What happens if a key is pressed during the SLEEP mode?

a) If a key is pressed during the power-saving mode, the SLEEP function is canceled and the 2-minute timer starts.

b) If a key is pressed while the 2-minute timer is in use, or during transmission , the SLEEP function is canceled.

Содержание RA773UA
























































































Результаты поиска

Содержание RA773UA

Отзывы:

Бренды по названию

Популярные бренды

Anritsu RA773UA, Инструкция по эксплуатации

Результаты поиска

Содержание RA773UA

Отзывы:

Бренды по названию

Популярные бренды