Anritsu BTS Master MT8221B, Руководство пользователя

Страница: 60 / 362

4-4 File Menu File Management
4-6 PN: 10580-00207 Rev. E BTS Master UG
4-4 File Menu
Key Sequence:
File
Save Measurement As: This key will save the current setup with a user
defined file name. The default file name is changed using the Save
submenu. To change the default file name, press the Save Measurement
submenu key to open the Save dialog box. Enter the new measurement
filename with the letter keys. Refer to
“Save Menu” on page 4-7 . Press Enter
to save the name and return to the File menu. The Save Measurement As
submenu key displays the new entered name appended with _#1.spa. After
a few seconds the screen with return to File menu. Press the Save
Measurement As key again and the new file name will be used.
Measurement files names have a .spa extension.
Save Measurement: Press this submenu key to display the “Save Menu”
on page 4-7 and Save dialog box. Measurements can be saved to internal
memory or to a USB flash drive. The saved measurement can be named
using the text entry keys. By default, measurements are saved in a directory
named /user to internal memory. The save destination is set with the
“Save Location Menu” on page 4-8 .
Save: Press this submenu key to display the “Save Menu” on page 4-7 .
Measurements can be saved to internal memory or to a USB flash drive. The
BTS Master is shipped with an Anritsu-approved USB flash drive for external
data storage. (Refer to the BTS Master Technical Data Sheet listed in
Appendix A for the Anritsu Part Number of the USB flash drive).
The saved setup, measurement or JPEG file can be named by using the text
entry keys. By default, measurements are saved in a directory named /user
to internal memory. The save destination is set with the
“Save Location
Menu” on page 4-8 .
Save on Event (Spectrum Analyzer mode only) : Press this submenu key to
display the “Save On Event Menu” on page 4-9 .
Recall Measurement: Press this submenu key to display the “Recall Menu”
on page 4-10 . This menu is for recalling measurements from internal
memory or a USB flash drive.
Recall: Press this submenu key to display the “Recall Menu” on page 4-10 .
This menu is for recalling measurement or setup data from internal memory
or a USB flash drive.
Copy: Press this submenu key to display the “Copy Menu” on page 4-11 .
This submenu is for copying files or folders from internal memory or a USB
flash drive.
Delete: Press this submenu key to display the “Delete Menu” on page 4-12
and a selection box that shows the setup and measurement names, the type
and the date and time that the information was saved. Use the rotary knob or
the
Up/Down arrow keys to highlight the file that is to be deleted and press
the Delete submenu key, then Enter . Press the Esc key to cancel the
operation. Note that deleted files can not be recovered.
Figure 4-5. File Menu
File
Copy
Recall
Recall
Measurement
Recall
Save
On
Event
Save
Save Measurement As
FileName.spa
Save
Measurement
Delete