13
How to select the proper copy area?
Example: There are two partitions in one 500G HDD. The charts below illustrate what portion would be
duplicated.
Note
The settings of “Skip Error” will count both Source and Target HDDs. If any HDD reach the
error tolerance, it will become Fail.
II.
Set Tolerance of Bad Track
Select function "6.2 Skip Error" to set the number of error that you accept to skip during tasks process. If
the HDD is very critical for content correctness, it is strongly recommended to keep the Skip Error to be
"0". Set bad sectors from 0 to 65535 or unlimited.
Caution
It is recommended to execute Compare after Copy to confirm the accuracy.
It is recommended to copy data by function “3.Copy+Compare”.
100GB
250GB
500GB
60GB Data
150GB
Unallocated
Partition
30GB Data
System and files
100G
B
250G
B
500GB
60GB Data
150GB
Unallocated
Partition
All Partitions
70GB
190GB
30GB Data
100G
B
250GB
500GB
60GB Data
150GB
Unallocated
Partition
Whole HDD
70GB
190GB
30GB Data
Copy Area:
30G+60G= 90G
This
function
will
analyze and copy only
data and skip empty
spaces.
Copy Area:
500G
This function will copy
the entire device.
Copy Area:
100G+250G= 350G
This function will copy
all data within the
defined partitions.
[Skip Error]
0
