9
Step 4: Completion!
Quantity of copy Pass/Fail, duplication time, and checksum value will show on LCD after duplication
completes. During process of duplication, every port captures in real-time message shown on LCD.
Note
The result will show light in red(fail) or green(pass).
Caution
User is responsible for verification of targets’ quality. Testing a few completed targets in a
mass production environment for quality control is recommended.
How to skip bad sectors?
Enter function “6.Setup
6.2 Skip Error”, you can set the number of bad sectors that you accept to skip during
Copy / Compare process. If the HDD is very critical for content correctness, it is strongly recommended to
keep the skip error to be ”0”.
[Skip Error]
0
P:2 F:0
29:14
Pass
Fail
Duplication Time
