annke SL1008, Инструкция по эксплуатации, Страница: 5 / 10

17
•
The word
PIR
will be blinking, press
[OK]
to confirm the
camera’s operation is PIR detection.
•
Press [UP] or [DN ] button until the word CAM is blinking.
•
Press [OK] button ONCE to confirm camera into CAM
mode.
•
Press [UP] button ONCE to enter burst shoot setting, the
burSt will blink.
•
Press [OK] then press the [UP] or [DN] button to select
the desired burst mode setting (number of pictures per
triggering).
•
Press [OK] to save your selection, then the time out T-O
will blink. Press [OK] button to enter time out setting or
press [M] button to exit.
Setting the Video Resolution in PIR mode:
Your camera can be programmed to 2 different video resolutions:
2 Stars is HD 720, 1 Star is VGA 640 x 480 pixels.
•
Slide the switch to the SET position, the status display will
show the camera current status.
•
Press the [M] button once enter the Manual
programming mode.
•
The word
PIR
will be blinking, press
[OK]
to confirm the
camera’s operation is PIR detection.
•
Press [UP] or [DN] button until the word VIDEO is blinking.
•
Press the [OK] button ONCE to confirm the camera in
VIDEO mode, the RES will be blinking.
18
•
Press
[OK]
then press the
[UP]
or
[DN]
button to select
the desired resolution.
•
Press [OK] to save your selection, then T and V will
blinking to indicate you into the time of video length
setting, press
[OK] button to enter video length setting or
press [M] to exit.
Setting the Time of Video length in PIR mode:
Your camera can be programmed to record 00:05-10:00 (5 ~ 600
seconds) of video per triggering. The Video mode is only
workable under PIR mode.
•
After press [OK] to completed the Video resolution
settings, and the status display shows T and V in blinking .
•
Press the [OK] button ONCE to into the time of video
length setting.
•
Press [UP] or [DN] button to select the desired video
length from 00:05 to 10:00 in 5-second increments.
•
Press [OK] to save your selection then the time out T-O
will blink. Press [OK] button to enter time out setting or
press [M] button to exit.
Setting the Time Out in PIR mode:
Your camera can be programmed to set the amount of time in
seconds or minutes the camera will sleep between PIR triggers.
•
In order to complete the Burst Shoot or Time of Video
Length settings by pressing
[OK] button.
•
The status display will show out T-O in blinking
19
•
Press the [OK] button to into the Time Out setting.
•
Press or hold [UP] or [DN] button to increase or decrease
the time value in seconds from 00:05 to 60:00 in 5
seconds increments.
•
Press [OK] to save the Time out setting.
•
You’ll then see the word T (Time) blinking. Press [OK]
button to enter time setting or press [M] button to exit.
Setting the Time and Date in PIR or TLM operation
mode:
Your camera uses the 24hr military time format.
•
Slide the switch to the SET position, the status display will
show the camera current status.
•
Press the [M] button once enter the Manual
programming mode.
•
The word PIR or TLS will be blinking, press [OK] to
confirm the camera’s operation is PIR detection or TLM.
•
Press [UP] or [DN ] button until the word T is blinking.
•
Press [OK] to enter HOURS setting first.
•
The
HOURS
digits will blinking.
•
Press [UP] or [DN] to increase or decrease the hour value
(00 – 23).
•
Press [OK] to save your selection and enter MINUTE
setting, the MINUTES digits will blinking.
•
Press [UP] or [DN] to increase or decrease the minute
20
value (00 – 59).
•
Press [OK] to save your selection and enter Month setting.
•
The MONTH digits will blinking.
•
Press [UP] or [DN] to increase or decrease the Month
value (1 - 12).
•
Press [OK] to save your selection and enter Day setting.
•
The
DAY
digits will blinking.
•
Press [UP] or [DN] to increase or decrease the Day value
(01 – 31).
•
Press
[OK]
to confirm the Date setting and enter Year
setting.
•
The YEAR digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the Year value
(01 – 99).
•
Once this is all done, press [ OK] . You’ll then see the word
- dEL - blinking.
•
Press [M] button to exit the program setting and back to
the status screen.
Setting the Time Lapse Mode (TLM):
The Time Lapse default setting value is from 19:00 to 07:00 the
next day. When the camera is set to use the Time Lapse Mode
(TLM) , the program settings will follow the Time Lapse settings.
Outside of the Time Lapse time frame; the camera will follow
the user defined PIR settings.