37
FCC Compliance
This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or television receptions, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measure:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
Shield USB cable with ferrite must be used with this unit to ensure
compliance with the Class B FCC limits.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment
38
Version Update: DO NOT PRINT THIS PAGE TO MANUAL
R0.0: Preliminary issue.
R0.1: Amend the mistake of FOR VIEWING ON YOUR HOME TV
section. And Burst QTY from 9 to 10.
R0.2: Correct some mistake of grammar by Alex.
R0.3: Correct the time lapse default value, and deleted the
count time incorrect sentence from page 27.
R0.4: Amend the PIR detection range from 20M to 15Meter.