2
4
Secondly, press the
PRESET
button (more than three seconds), the screen display ,
4 The HOME Function
Thirdly
Press
the
HOME
button. Then the point of the preset that you need.
NOTE
If you forget the home point of the preset after a long time that you have set, you can press the
HOME
button directly, then the speed dome camera will turn to the station is what you have set before.
1
set the home point of preset
Firstly, turn the camera to the station that you need.
2
Set the Scan Position in rang of 360°
After you have set the home point of preset ,you can press the AUTO button ,then the speed dome camera will
do 360°scanning which rotate around the HOME preset station that you have set before. If you want to stop
the speed dome camera ,you can press the SHUT button ,then press the ‘-/--’button ,at last press the 128.
The speed dome camera will stop running.
3
If you want to clean the present station number, you can press
DELETE
button for 3 seconds, and controller
will display CLR-. Its means you have delete the present station.
Note
what is different between 360°scanning and the HOME function
Firstly, it only running at level 0 ° if you use the 360°scanning function ,but it can running at any angle if you
use the
HOME
function
APPENDIX D CONTROLLER GUIDELINESS