2
3
When you input the number, if you press button C can delete last input number.
NOTE
:
When you set address 1 is Delco-D protocol, this is Pelco-D, ID address, means Pelco-D ID address is 1.
When you set address 1 is Pelco-P protocol ,this is Pelco-P,ID address, means Pelco-P ID address is 1.
If you want to clean an address number, you need press
DELETE
button 3 seconds, and controller will display
CLR-. Its means you have delete the address.
Description
：
The number of the preset position from 1 to 95
、
98 to 120
Description
：
The number of camera from 0 to 255
Function
：
Select the address of the camera to be controlled.
Only when the value number is in conformity with the address of the Camera, it will be under control.
3 Set the Preset Position
When you press SHOT button, Screen display like , First P means preset point, Another three digital
‘002’means that the Preset Position is 2, You can set the preset position like set up the address of the Camera .
After you set the preset number, Camera will get the preset point what you selected.
Function
：
Save current position.
If you want to clean the present station number, you need to press
DELETE
button 3 seconds, then the controller will
display CLR-. Its means you have delete the present station.
APPENDIX D CONTROLLER GUIDELINESS