9
CLEANING AND MAINTENANCE
CAUTION: Before cleaning, turn OFF and unplug the unit from
mains power .
External cleaning of unit:
Turn off and unplug the unit.
Use a soft cloth slightly dampened with a little water and dishwashing
soap to wipe the outer surfaces.
Do not allow water to slip into the internal parts as this could damage
the unit and result in electrical shock and injury.
Allow the unit to dry thoroughly
before use.
Cleaning the Pre-filter and HEPA filter
Turn off and unplug the unit.
Release the air inlet grille by pressing on the locking latch then
pull.
Grasp the left and right side of HEPA filter frame and gently pull
out the filter.
Run a vacuum cleaner with brush attachment on low power
setting along the Pre-filter and HEPA filter to pick up the dust
and other particles.
Re-attach HEPA filter and the air inlet grille.
IMPORTANT! When placing the filters back into the air purifier,
ensure the air inlet grille had locked into place or the unit will
not turn on.
Note: It is recommended that the filters are cleaned every 100-
500 hours of operation, depending on the air quality in the room
and surroundings.
