IMPORTANT! Always disconnect the appliance from the mains
power outlet if it is left unattended and before assembling,
disassembling or cleaning
USING YOUR HAND MIXER
1. Fit the whisks (5) into the Beater Holes and push
it in firmly until it locks.
2. Connect the appliance cord plug into a mains power outlet.
3. Hold the mixer handle. Lower the whisks into ingredients in the
mixing bowl.
4. Switch ON by selecting the desired speed using the speed control
switch (3). The mixer will begin to mix the ingredients in the bowl.
5. When you have finished mixing, stop the mixer by selecting the
speed button switch to "0" immediately.
6. Make sure the beater is switched OFF and disconnected from
mains power outlet before removing accessories. Wait until the
whisks have stopped revolving completely; press on the Ejector
Knob (2) to remove the whisks.
7. Unplug the appliance when you have finished mixing.
Beater
hole
