anko EV-693-S296, Руководство пользователя

Страница: 14 / 24

Page 14 of 24
Plug the Battery Charger into the power point and switch on.
During Charging, the indicator light bars on the back of the battery will
illuminate in a rolling fashion indicating the battery is charging.
All the bars will be illuminated and be steady when fully charged.
When the battery is fully charged, switch off and unplug the battery charger
from the power supply.
When fully charged, the Vacuum Cleaner is ready for use.
NOTE : NEVER BLOCK ANY VENTS OR OPENINGS .
6 Using the Vacuum Cleaner
6.1 On / Off
To use the Vacuum Cleaner, assemble the unit as previously instructed and
ensure the battery is fully charged.
When the High-Speed setting is selected, the fully charged battery will provide
approximately 15 minutes of power for continuous use of the vacuum cleaner.
When the Low-Speed setting is selected, the fully charged battery will provide
approximately 55 minutes of power for continuous use of the vacuum cleaner.
To switch on, press the top button on the handle once. The vacuum cleaner
will start in low power mode.
Press the same button again to turn Off.
Note: The vacuum cleaner cannot be started when on the charging stand.