Page 14 of 16
7 Completion and Storage
•
After you have finished using the massager, clean it as described under the
Cleaning section then store safely in its box and in a dry place.
•
Do Not wind the battery charger cord around the massager or charger body
as this will damage the cord over time. Simply loop the cable and place next
to the charger.
8 Technical Specifications
Battery Charger Voltage:
Input: AC 100-240V~ 50Hz, 0.5A
Battery Charger Power:
Output: 9VDC 1000mA. 9 Watt
Battery Type:
Li-ion
Battery Pack Spec:
2000mAh, 7.4VDC (2 Cells)
Massager Automatic runtime:
15 minutes
9 Troubleshooting
Problem
Cause
Remedy
No Power.
Battery has not been
charged.
Plug in battery charger to massager and
power point and allow to charge for a
minimum of 4 hours
No Massage
Appliance not switched on
Press the On / Off button
Refer to Section “No Power” for Remedy
The Speed setting is too
low
Press the Speed + button until the
desired intensity has been reached
No Heat
Heat not turned on
Press the Heat button. The button will
illuminate Red Colour
Not enough time to heat
The Heating globes will take a little time
to heat the Dome.
Appliance
turns off
during use.
The appliance has an auto
off function which
activates after approx. 15
m/-1min of use.
Allow the product to cool for at least 30
minutes and then turn on again.
Battery power has run out
Plug in battery charger to massager and
power point and allow to charge for a
minimum of 4 hours
Содержание CF-4802
Страница 16: ...Page 16 of 16...