anko CF-4802, Руководство пользователя

Страница: 12 / 16

Page 12 of 16
5.4.2 Power Level
•
Press the Power Level button to decrease the massager intensity to Mid
Level. The button colour will change to Light Blue colour.
• Press the Power Level button again to decrease the massager intensity to
Min Level. The button colour will change to Dark Blue colour.
•
Press the Power Level button again to cycle the massager intensity back
around to Full Level. The button colour will change to Green colour.
• Press the On /Off button, to turn the massager off.
Do Not use for more than 15 minutes at a time without a 30 minute cool down
period in between uses.
Note: If you forget to turn the massager off after the recommended maximum 15
minutes of use, the unit will automatically turn off after approximately 15 m/-
1min.
Note: Avoid using the massager before going to sleep or in conditions where you
may fall asleep when using the massager.
5.4.3 Mode Function
The mode function gives you three different modes of massaging.
The Default mode give a continuous steady vibration.
The button colour will be Green colour.
•
Press the Mode button to change the mode to short on / off bursts of vibration
The button colour will change to Light Blue colour.
• Press the Mode button again to change the mode to long on / off bursts of
vibration The button colour will change to Dark Blue colour.
•
Press the Mode button again to cycle back around to the default mode.
The button colour will change to Green colour.
• Press the On /Off button, to turn the massager off.
Do Not use for more than 15 minutes at a time without a 30 minute cool down
period in between uses.
Note: If you forget to turn the massager off after the recommended maximum 15
minutes of use, the unit will automatically turn off after approximately 15 m/-
1min.
Note:
Avoid using the massager before going to sleep or in conditions where you
may fall asleep when using the massager.