34
|
• When inserting the printer, pull the connec-
ting cables to the rear.
• Before inserting the cable cover, make sure
that all cables are tight and secure. When
tilting the tablet, no cable is bent.
• Hang the cable duct at the bottom of the
metal housing.
• Push the cable duct cover forward until it
snaps into the catch.
4.5. Adjusting the display angle
For easier operation of the tablet, the tilt angle is individually adjustable.
Attention!
To avoid pinching fingers, grasp the tablet insert with both hands on
the side, in the area outside the bottom and top brackets.
Attention!
A till.one | mobile that is not screwed to the cash desk can fall over
when tilting the tablet
