|
25
2.4. General safety information
Non-compliance with the safety information listed below can lead to damage to the operator
or to the ANKER till.one | mobile.
• All persons using this product, all persons working in the area where this product is used
and all persons handling this product should be familiar with the content of this data sheet.
• The information and the written instructions shall be comprehensible to the workers
concerned. Ensure that all persons handling this product are informed about the storage
location of this data sheet. They must have access to the manual(s) at any time.
• The ANKER till.one | mobile should only be used for the purpose intended.
• Private use of the ANKER till.one | mobile, e.g. as a toy, is prohibited.
• The described ANKER product should be checked at least once daily for any visible damage.
• Sensitize employees, in case of product is not operating correctly, to use the POS not
further and to pull specialist staff (e.g. electrician) there.
• With visible defects or damages the product must not be used and must be taken out of
service immediately. All work on the equipment may only be performed by a qualified or
trained person.
• The electrical equipment must be checked regularly according to the legal industrial safety
terms.
• Correct connection to the FI of main supply, function of ground fault circuit interrupter
(GFCI) must be checked regularly.
• Prohibit bypass of safety device. The ANKER till.one | mobile may be operated only with
properly right and functioning protective facilities.
• Connection only by specialist staff.
• Before connection examination live parts on damages.
• Remove loose connections and broken cables immediately. All types of works must be
carried out after the separation of the energy supply. Cables may not be got caught or be
squeezed. Cables shall be securely fastened and positioned in such a way that they show
no trip traps or may be damaged. Works on the checkout may be carried out only by quali-
fied professional forces.
• At all works at the checkout the legal regulations are to be followed.
• Repair work should only be carried out by trained personnel.
• Work on the electrical equipment of the ANKER till.one | mobile should only be carried out
by appropriately qualified staff.
• At all works on electrical components the legal and professional association rules must be
kept.
