Anita GP-510- 446(7) Скачать руководство пользователя страница 9

Страница: 9 / 68

anita-b

GP-510-446(7)

The sewing machines are equipped with a safety clutch on the lower shaft (A) fig. 8 that allows

the operator to turn the driving part of lower shaft (A) when the loopers or feed dogs are locked.

The clutch consists of segment (B) engaging with.groove (C) in the disk on lower shaft by the

pressure of two springs. The spring pressure can be regulated with hexagon screws (D). If the

clutch is skipping over find out the cause and remove the fault. Only a specia!ist is al!owed to

adjust the clutch force. The clutch must not slip in the course of normal sewing! If it is the case

call a specialist to examine and adjust the machine.

Maintenance

Caution!

Switch off the main switch and remove your feet from the pedals on the machine support before

cleaning and oiling of the machine so that the machine may not be started by unintended

treading on the pedal.

Cleaning:

Keep the machines clean and at least once a day (depending on the fabrics used) remove dirt

and waste from the looper and feed dog area. If the machine is equipped with a thread trimmer

clean the trimming area, as well. Do not use volatile liquids for cleaning they would cause

damages to the machine and to your health. A dry cloth will do. Check if the filter screen on

electric motor is not clogged with dust.

Oiling:

The machine should be oiled with an oil normally used for sewing machines. Every day, before

you start sewing drop one drop of oil into oiling holes marked with red colour on the machine.

Switching-on and switching-of the main switch.

Содержание GP-510- 446(7)





































































Результаты поиска

Содержание GP-510- 446(7)

Отзывы:

Похожие инструкции для GP-510- 446(7)

Бренды по названию

Популярные бренды

Anita GP-510- 446(7), Руководство пользователя

Результаты поиска

Содержание GP-510- 446(7)

Отзывы:

Похожие инструкции для GP-510- 446(7)

Бренды по названию

Популярные бренды