Anita GP-510- 446(7) Скачать руководство пользователя страница 3

Страница: 3 / 68

anita-b

GP-510-446(7)

1 Safety Measures

Do not put the machine into operation until an appropriate preparation is carried out by

a specialist or an authorised person, and until you get acquainted with safety measures.

1. Any sewing machine may be operated only by a properly trained operator.

2. Take into consideration the safety regulations valid in your country.

3. The sewing machine may be used only for the operations for which it has been.designed.

Other operations are inadmissible.

4. All safety measures must be observed on the machine before puttíng into operation and

during operation.

5. It is advisable to wear protective glasses to ensure personal safety when working on the

machine.

6. If you are going to make any modifications or changes on the machine observe the safety

regulations. Modifications can only be made at your own risk.

7. The main switch of the machine must be switched off or the plug must be pulled out of the

socket of mains supply when following operations are to be performed (if you us

mechanically controlled clutch motors without a fuse preventing the machine from being

started with the pedal wait until the motor stops).

7.1 Threading the needle thread (threads), threading the looper thread, etc.

7.2 Replacing needles,presser foot; stitch plate, looper, looper bobbin,feed dog, needle guard,

finger guard, cloth guide, etc.

7.3 When you leave the workplace and.when you leave the machine unattended.

7.4 Machine maintenance (cleaning).

8. Repairs, maintenance and modifications of the machine (see point 6) may be carried out only

by a specialist or an authorised person. Only spare parts supplied by the machine builder

should be used for repairs.

9. Works on the electrical parts of the machine can only be carried out by an electrician or under

an authorised person's control and supervision.

10. Working on "live" parts and equipment is inadmissible.

11. Compressed air supply has to be disconnected before maintenance and repairs of pneumatic

devices. Residual compressed air has to be let off before the works can be done.

12. The user will be held responsible if safety measures given in the Instructions for Use are no

observed.

13. An inseparable part of the Instructions for Use is the Instruction for use of the respective
drive

which must be observed, as well. In particular point 3 "Safety Instructions".

Содержание GP-510- 446(7)





































































Результаты поиска

Содержание GP-510- 446(7)

Отзывы:

Похожие инструкции для GP-510- 446(7)

Бренды по названию

Популярные бренды

Anita GP-510- 446(7), Руководство пользователя

Результаты поиска

Содержание GP-510- 446(7)

Отзывы:

Похожие инструкции для GP-510- 446(7)

Бренды по названию

Популярные бренды