Angelcare AC401, Руководство пользователя

Страница: 4 / 87

4
E
N
• All programmable functions of your Angelcare© monitor are available through the MENU
button.
• When the desired option appears on your screen, press SELECT.
• The different choices of each option is available through the UP and DOWN arrows.
• AT ANY TIME after programming a function, if you wish to exit the menu selection,
press on the EXIT button. If you wish to perform additional programming press MENU
to view the next option.
STEP 5
SCREEN AND BUTTONS
STEP 6
TICS, SOUNDS AND MOVEMENTS
STEP 7
OUT OF RANGE INDICATOR
STEP 8
MICROPHONE SENSITIVITY
Your Angelcare© monitor gives you the possibility to chose what you wish to monitor.
- The “TIC” is a sound that tells you that your sensor pad is detecting movements.
- The “SOUND” function is activated by the baby’s voice or continuous or is transmitted
continuously (see STEP 8)
- The “MOVEMENT” function is activated when movement is detected by the sensor pads.
It detects all baby’s movements and warns you when there is no movement.
A CONTINUOS BEEPING SOUND is heard when no movement is detected for 20 seconds.
If you are receiving false alarms, adjust the sensor pad sensitivity level (STEP 2).
• Press MENU, the 3 flashing icons will appear.
• Using the arrows, select each icon, and decide if you want it ON or not.
• When your selection is made press SELECT, and it will bring you to the next icon.
• Press MENU to view the next option, or EXIT if you wish to stop programming now.
Your monitor is equiped with an optional “Out of range” indicator function, which will advise
you when the two units are not communicating with each other. Out of range situations can
be caused by distance or by physical interferences.
Range: up to 250 meters/ 820 ft (open
field); between 80 meters/ 262 ft and 100 meters/328 ft (indoors).
When the units are out of range you will hear a DOUBLE BEEP every 8 seconds and the “out
of range”icon will flash on the screen of the parents unit.
• Press MENU, the OUT OR RANGE icon and the word OFF will appear on the screen.
• Turn this function ON or OFF by using the arrows.
• Press SELECT
• Press MENU to view the next option, or EXIT if you wish to stop programming now.
The sound monitoring can be “voice activated” or “continuous”. If you choose the continuous
transmission mode, you will hear your baby’s every little sounds. If you use “voice activated”
you will hear sounds depending on the level of sensitivity that you choose.
• Press MENU, the MICROPHONE and the word ON will appear on the screen.
• Leave it ON to keep it “voice activated” or OFF to be in “continuous” mode. Use the arrows
to select On or OFF.
• Press SELECT.
• If you wish to use the voice activated monitoring function, Press MENU again to chose the
level of sensitivity of the microphone (4 levels), using the arrows.
• Press SELECT when the desired level appears on the screen.
• Press MENU to view the next option, or EXIT if you wish to stop programming now.
TIC SOUND MOVEMENT
AC401 international.qxd 7/11/07 8:34 AM Page 4