Anest Iwata FCV-5-R1, Инструкция по эксплуатации

Страница: 5 / 8

5
Flow Control Valve
Be sure to observe warnings and cautions in this instruction manual.
I not, it can cause liquid ejection and result in serious bodily injury.
Be sure to observe ollowing marked items which are especially important.
Indicates a potentially hazardous situation which, i not avoided, may result in serious injury or loss o li e.
Indicates a potentially hazardous situation which, i not avoided, may result in minor or moderate injury or property
damage.
Important
Indicates notes which we ask you to observe. The sa ety precautions in this instruction manual are the minimum
necessary conditions. Follow national and local regulations regarding ire prevention, electricity and sa ety as
well as your own company regulations.
Hygiene
Indicates i you do not pay attention to the contents, rom hygiene problems, you and your corporate can ace
social corporate responsibility, loss o social trust, compensation or damage, products recall and complaint rom
customers.
Important specifications
Max. Working Pressure Fluid / IN ; 1.0MPa / 10bar / 145PSI Fluid / OUT ; 0.6MPa / 6bar / 87PSI
Control. Air ; 0.6MPa / 6bar / 87PSI
Temperature range
Atmosphere ; 5
℃〜
40
℃
Fluid / Air ; 5
℃〜
43
℃
Main specifications
Model
Diaphragm
area ratio
Air side
：
Paint side
Max. primary
pressure
MPa/ bar
Adj. Air Pressure
range
MPa/ bar
Max. low
[L/min]
（
c m
）
Fluid & Air
Connection
Mass
[g](ibs)
Material o wet
section
FCV-5-R1
1
：
1
1.0/10 0 ~0.6 / 0 ~6
2.0
( 0.07 )
Fluid IN G1/4
Fluid OUT G1/4
Air tube Rc1/8
580
(1.3)
Stainless steel
Te lon
FCV-5-R4
1
：
4
FCV-5-R8
1
：
8
Flow vs adj Air pressure
Adj Air Pressure [MPa]
FCV-5-R1 / -R4 / -R8
INSTRUCTION MANUAL
This Anest-iwata low control valve complies with ATEX
regulations 2014/34/EU,
Protection level
：
Ⅱ
2 G
，
Suitable or use in Zones 1 and 2.
X marking
：
Any static electricity discharge rom the low control
valve is to be diverted to the grounded by connecting to
grounded pump or grounded luid pipelines or grounded
metal bracket as stipulated.
This manual contains IMPORTANT WARNINGS and INSTRUCTIONS.
Equipment in this manual is exclusively or regulating luid pressure
purposes.
Do not use or other purposes.
The operator shall be ully conversant with the requirements stated in
this instruction manual including important warnings, cautions and
operation and correct handling.
Read and understand the instruction manual, be ore use and retain
or re erence.
Testing conditions
・
Fluid Input Pressure
：
0.5MPa
・
Gun type
：
WA-100-082P(Nozzlef0.8)
・
Viscosity=12sec(NK-2)
・
Tube f4×f2.5-2m
Recommended flow range
1)
FCV-5-R1 0.07MPa
〜
over 70 ml/min
FCV-5-R4 0.10
〜
0.23MPa 35
〜
150 ml/min
FCV-5-R8 0.12
〜
0.25MPa 20
〜
100 ml/min
FCV-5-R1
-R4
-R8
1) Reference value (varies depend on conditions)
II 2 G Ex h IIB T6 Gb X
This product uses materials that con orm to the Japanese Food
Sanitation Law in the wetted part, and it has a structure that is
easy to clean. So this can be used or soluble ingredients, but i
maintenance is insu icient, germs could be generated. Carry
out su icient maintenance and sterilization work a ter use at
your own risk.
F
lo
w
[
m
l/m
in
]
1