Anemoment Data Logger 422, Руководство пользователя

Страница: 24 / 54

Anemoment LLC 22 Data Logger 422 User Manual
DL422-E-Series MicroSD Card Insertion and Removal

Access the card connector by removing the four screws
from the base of the weather-tight enclosure and lift the lid.

Gently lift the black gasket to access the edge of the card
connector.

To remove a card gently press the edge of the card inward
toward the circuit board. When the card pops out, remove
it from the slot.

To insert, slide MicroSD Card into the slot with the gold
contact pins side facing down, until it clicks into place
remove and replace the battery.

Put the gasket back in place, and make sure that it is
properly seated on the raised edge.

Replace the lid on the gasket and inspect that the gasket is
positioned correctly between the lid and the base.

Tighten the four screws.
Figure 9: Accessing MicroSD Card
Connector in DL422-E-Series Unit