ANEMOI AIRPIVOT, Руководство по установке

Страница: 15 / 19

AIRPIVOT
15
6 OPERATION
Once the fan is powered, follow the next steps to start the fan:
1- Change the main switch placed on the side of the control box to the start position.
2- Check the status of the fan on the data display, as shown in table.
3- Adjust the potentiometer to the required speed.
4- Check the speed in the control screen.
To stop the fan, perform the procedure in reverse.
NO DATA DISPLAY CONTENT
Normal time Normal running state
Failure time Failure for the fan. Please, refer to chapter 7.
CAUTION!
Do not disconnect the fan for the current to start and stop the fan. Otherwise, the warranty would be
voided.
OK!
E-IPM