9
Step 2:
Flip the gear over and secure the Nub to
the gear by threading four 6-32 x 0.5 in Hex Head
Screws (am-1436) into the Nub.
Step 3:
Ensure that a #10-32 Set Screw is
partially threaded into the Nub.
Step 1:
Place a 6mm D-Bore Double Boss
Nub (am-3215a) into the center hole of a
40 Tooth Gear for PicoBox (am-3407) and
align the bolt circles of the Nub and the
Gear.
6X
Repeat 5 more times to make 6 total Gear Assemblies.
PicoBox Gear Assembly Instructions (QTY 6)
NOTE: These instructions provide steps
to create a PicoBox Duo that utilizes a
1:1 gear ratio between the NeveRest
motors and the PicoBox Output shaft. To
utilize the other included 1.28:1 or 1:0.78
ratios, follow these steps with the
included 35 Tooth and 45 Tooth gears.
The TileRunner Limited Edition does not
include these additional ratios.