16
PicoBox Duo and Chassis Assembly Instructions
Step 32
: Insert a M6 x 75mm SHCS (am-1417)
into the bearing of the Outer Plate, through the
Outer Wheel Assembly and aluminum spacer, and
through the bearing on the Inside Plate. Secure
the bolt using an M6 Nylock nut (am-1111). Do not
overtighten
– the bolt should move freely in the
bearing. Lock the wheel in place using the #10-32
set screw on the Nub.
Step 33
: Repeat Steps 31-32 for the Outer Wheel
Assembly on the other end of this half of the
chassis using a 0.25 in long Aluminum Spacer
(am-3424) between the pulley and the bearing on
the Inside Plate.
Step 34
: Repeat Steps 23-33 to assemble the
other half of the drivetrain. Be sure to use the
same length aluminum spacers on each Outer
Wheel Assembly at each end of the chassis to
ensure the wheel spacing is symmetrical.
Step 35
: Install the Belly Pan (am-3394) onto the
bottom flanges of the Inside Plates, and secure
with eight 6-32 x 0.5 in Hex Head Screws (am-
1436) and eight 6-32 Nylock Nuts (am-1419).
Install the screws and nuts at each end of the two
flanges on each Inside Plate.
Step 36
: Congratulations! You now have a complete TileRunner Original 6WD Chassis.