10
PicoBox Duo and Chassis Assembly Instructions
Step 1:
Press a 6x12x4 Flanged Bearing (am-
3377) into the center 12mm hole of a PicoBox
Duo gearbox plate (am-3405).
NOTE: For a
TileRunner GTO, use the PicoBox GEO
gearbox plate (am-3476) instead.
Step 3:
Install six M3 x 0.5 x 5mm long SHCS
(am-1443) in each NeveRest motor to secure it
to the gearbox plate.
Step 2:
Insert a NeveRest 40 (am-2964a) motor
into the remaining 12mm holes of the PicoBox
Duo gearbox plate, opposite of the flanges on
the gearbox, and line up the threaded holes on
the end of the motor with the bolt-circle holes of
the gearbox plate.
Step 5:
Ensure that the end of the shaft is flush
with the end of the bearing.
Step 4:
Install the 6mm D-Shaft (am-3226-100)
into the center bearing on the PicoBox Duo.
NOTE: Make sure the flange of the
bearing is on the same side of the plate
as the flanges, and is flush against the
sheet metal of the gearbox plate.