Laser Detection at its Best
Page 6
Instruction Manual
Digital Laser Receiver Metor
Model: MTR-90R
Environmental Protection
Warranty
AndroTec Metor and clamp are warranted to be free of
defects in material and workmanship according to the
statutory warranty regulations.
The user of the product is expected to follow all opera-
ting, maintenance and care instructions. Any evidence
of misuse, alteration, or an attempt to repair products
by unauthorized personnel, or use of parts other than
those provided by AndroTec GmbH automatically voids
the warranty.
AndroTec grants an extended warranty for a period of
three years, if within six weeks from the date of purcha-
se, the warranty registration card is filled out and
returned to AndroTec or the product is registered via
Internet at www.androtec.com. Please make sure that
the registration is filled out properly and on file with
AndroTec.
This warranty period is thirty-six months from the date
the new product is delivered from the dealer to the
purchaser or is put into service by a dealer as a demon-
stration unit or rental unit. Competitor purchased and
tested units are excluded from this warranty.
AndroTec may choose to repair or replace, at its
discretion, any Metor in the event of a failure for any
reason, during the warranty period. In case of a warran-
ty claim, return the product and a proof of purchase to
AndroTec.
AndroTec's liability under this warranty is limited to
repairing or replacing any product returned to its factory
for that purpose. The foregoing states the entire liability
of AndroTec GmbH regarding the purchase and use of
its product and they shall not be held responsible for
any consequential loss or damage of any kind. This
warranty is in lieu of all other warranties, expressed or
implied, and constitutes all of AndroTec GmbH liability
with respect to merchandise sold by it.
Warranty is strictly related to repair or substitution of
defective parts according to AndroTec's discretion. The
warranty does not cover any other damage that may
occur directly or indirectly using defective parts.
Do not dispose of the device with domes-
tic waste. Have the device disposed of by
an authorised waste management
company or your municipal waste mana-
gement organisation.
Adhere to the applicable regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmentally
friendly manner.
Maintenance and Care
Keep the device always clean, especially the
laser-sensitive area!
!
Do not use aggressive cleaning solvents.
!
If soiled heavily, the device can be cleaned under
running water.
!
Do not use high-pressure cleaner.
!
Allow the device to dry completely before storing
it in a closed container. Residual moisture can
result in corrosion of the battery contacts. In this
case our warranty expires.
!
In the unlikely event of a failure or defect, have
the appliance examined and repaired by
AndroTec.
!
In all your queries and spare part orders, always
quote the 8-digit serial number (see type plate) of
your device.
!
AvG - Averaging: Hi(gh) / Low
Default:
High.
Set it to
Low,
if you need faster changing
of the values, while moving the device through the laser
beam.
!
Unt - Unit: mm / cm / in(ch) / f(ract). in(ch)
Default:
mm
. Choose desired numeric elevation display
unit.
!
o.o.b - Out of beam display: On/OFF
Default:
OFF
. Switch Out-of-beam display on and off.
For a description see chapter
Display.
!
InF - Device Information
Find Information about Firmware Version (
Fw
), Device
Code (
dc
) and Serial Number (
Sn
) here.
NOTE: All menu settings will be retained when the
receiver is turned off.
Batteries:
Do not dispose of batteries with domestic waste, do
not expose them to fire or water. Collect and recycle
batteries or dispose of them with due care for the
environment.
