WANGUARD 5.2 User Manual & Administrator's Guide
Log in to Console using the default username / password combinaton of
admin
/
changeme
.
To understand how to navigate within the Console, please read the chapter from page 6.
If the Console is installed on a public server, you should immediately change the default password for the
"admin" account. To do that click the
Admin
menu on the top-right part of the window and select <<Change
Password>>.
Quick Configuration Steps
●
Estmate storage requirements, review decoders and graphs parameters – page 32
●
Setup the anomalies detecton parameters and decoders – page 33
●
Confgure the reacton to trafc anomalies – page 34
●
Add your IP address ranges and important IPs to an IP Zone – page 40
●
Add anomaly detecton for prefxes, create Thresholds Templates – page 41
●
Add and confgure a Sensor then set it as Actve – page 42
●
Watch for errors in Events. Receive error notfcatons by email – page 43
●
Generate Reports and send them periodically by email – page 57
●
Create your own Dashboards and add relevant widgets – page 16
●
Create new accounts for your staf or customers – page 59
●
Confgure new BGP Connectons, if needed – page 51
●
Confgure Filters, if needed – page 53
- 31 -
Содержание Wanguard 5.2
Страница 1: ......