background image

Safety   

 

 

         

                  4 

 

 

                                  MAXXfl o EVO Lite    

                                                                 

1.2 Recommendations and notices

Caution

Ensure that the heater is regularly serviced. Contact a quali-
fi ed installer/engineer or arrange a maintenance contract for 
the servicing of the heater.

Caution

Secure against unintentional switch on. When the DHW 
tank is empty, ensure that the heater cannot be switched on 
unintentionally.

Caution 

If there is a danger of freezing do not shut the 

gas supply or power off  to the heater. This will allow the 
frost protection systems of the heater to operate provided 
the heater is not in a fault condition.

1.2.1 Condensate trap

T

o ensure continued effi  cient operation of the heater it is recom-

mended that the condensate outlet is checked and serviced at 
regular intervals. The frequency of servicing will depend upon the 
particular installation and usage but in every case a maximum of 
twelve months should be allowed between service inspections.

The condensate outlet shall not be modifi ed or blocked. It is recom-
mended that as part of the regular maintenance the condensate 
systems is examined, cleaned and the condensate trap on the side 
of the heater is emptied and cleaned. The trap can be examined by 
unscrewing by hand the bowl at the bottom of the trap. See illustra-
tion 

1.2.2 Heater installation and Maintenance

This heater has been designed for use with G20 and G31 gases and 
is manufactured to give an effi  cient, safe and long service life. To 
ensure continued trouble-free operation of this heater at maximum 
effi  ciency, it is essential that correct installation, commissioning, 
operation and service procedures are carried out strictly in accord-
ance with the instructions given in the “Installation & Maintenance 
Manual” supplied separately to this guide.

Only original parts and accessories from the manufacturer may be 
used on this heater. Using non-approved parts may compromise the 
safety of the heater and invalidate any warranty.

Содержание MAXXflo EVO Lite





























Отзывы: