5. Press the hour button until the
correct hourly time is set on the LCD
display.
6. Once you have selected the correct
hourly time, press the MIN button
and follow the same process.
Pressing the button once will
increase the time by 1 minute and by
holding the MIN button again this
will increase the minutes on the
timer quicker.
7. Once the correct time is set up on
the timer function, press the PROG
button once and the TIMER indicator
will disappear from the LCD display
and revert to the clock time on the
LCD display.
8. To finish setting the timer function
press the ON/OFF button twice and
the auto indicator will light up. The
coffee maker will start making the
coffee at the set time.
Please note: There is no memory
function.
Important notes
Please note, the clock does not have
to be set up to make coffee.
The Coffee maker can be turned off
at any time in either the manual or
timer mode:
Press the ON/OFF button twice if the
coffee maker is in the RUN mode.
Press the ON/OFF button once if the
coffee maker is in the AUTO mode.
If the coffee maker is not turned off
by hand, the appliance will stop
heating automatically after 35
minutes in both the (RUN) and
(AUTO) mode.
Descaling the appliance
Regularly remove mineral deposits
from the appliance. The frequency you
remove mineral deposits depends upon
the amount you use the appliance. It is
recommended you do this every 30
days.
To remove mineral deposits:
1. Fill the water tank with water and
descaler to the MAX level using a
ration of 1 parts descaler to 4 parts
water.
Please
use
household
descaler and not industrial descaler,
citrus juice can also be used.
2. Place the carafe onto the warm
plate.
3. Run a brew cycle as mentioned in
“making coffee” without placing
coffee into the filter holder.
4. After the coffee machine has
percolated the equivalent of one
cup, press the “ON/OFF” button
once.
5. Leave the solution to work in the
appliance for 15 minutes.
