How to operate the control panel
How to make coffee in the manual
mode
1. The coffee maker can make coffee in
manual mode without setting up the
clock or timer.
2. Switch on the coffee maker by the
mains and the LCD digital display will
turn on. Press the on button once,
and the digital display and run mode
indicator will light up. The machine
will then begin boiling the water and
making coffee.
How to set the clock
1. When connected to the mains
power, the LCD will display 12:00.
The run and auto indicator light will
not be turned on.
2. Press the PROG button once and the
LCD will display the word CLOCK in
the LCD display.
3. The clock can now be set.
4. Press the HOUR button once and the
time will increase by 1 hour. Holding
the HOUR button will increase the
hourly time quicker.
5. Press the HOUR button until the
correct hourly time is set on the LCD
display.
6. Once you have selected the correct
hourly time, press the MIN button to
set the correct time. By holding the
MIN button again this will increase
the minutes on the clock quicker.
7. Once the correct time has been set,
press the PROG button once and
the TIMER indicator will be
displayed in the LCD display. Press
the PROG button again and the
TIMER indicator will disappear. The
clock has now been set up.
8. If the machine is turned off by the
mains the LCD display clock will be
turned off and will have to be set
again.
How to set the timer of the Coffee
Maker
1. The Andrew James Automatic Filter
Coffee maker can be programmed
to begin making coffee at a selected
time using the PROG mode with the
built in timer facility.
2. Make sure the correct time on the
clock is shown on the LCD display.
3. Press the PROG button twice so that
the word TIMER is displayed in the
LCD display. This means the timer
can be set up.
4. Press the HOUR button once and
the time will increase by 1 hour.
Holding the HOUR button will
increase the hourly time quicker on
the timer.
