How to use the appliance
Before use
1. Fill the water tank of the coffee
maker with white vinegar, but make
sure to leave the filter inside the
machine, as the vinegar will get rid
of any residue or smells that have
formed on the filter.
2. Turn the coffee maker on and run it
with the white vinegar inside. Once
the coffee maker has completed a
cycle, let the vinegar sit inside the
machine for about twenty minutes.
3. After you have let the machine go
through a full cycle and waited for it
to sit for twenty minutes, pour the
vinegar down the drain.
4. Fill the water tank of the appliance
with water as if you're about to
make a pot of coffee. Turn the coffee
maker on again and let the water go
through a normal cycle in order to
rinse the vinegar from the machine
completely.
Making coffee
1. Lift the lid up and pour cold water
into the water tank (to the sides of
the filter holder) to the required
level.
Please note: The levels indicate small
cups.
1. Place the coffee jug on the hot plate,
ensuring that the coffee lid is directly
underneath the filter holder hole.
2. Put the required amount of coffee
powder into the mesh filter and
then place it into the filter holder. A
1:2 ration of scoops to water should
create medium to high strength
coffee.
3. Close the top cover.
4. Switch on the coffee maker by the
mains, the LCD digital display will
turn on.
5. Press the on button once, which will
make the digital display light up as
well as the run mode indicator light.
The machine will now begin making
the coffee.
6. After the coffee maker has finished,
there will be no water left in the
water tank. The coffee will be kept
warm if the coffee maker is
switched on and the coffee pot is
kept on the heating plate.
7. The coffee in the coffee pot can be
warmed
at
the
following
temperatures:
Above 75˚c (approx. half an hour)
Above 70˚c (approx. an hour)
Please note: The appliance will stop
heating automatically after 35 minutes.
