15
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:
The
Live
(
Brown
) wire
connects to the right- most
live (L) terminal nearest to the
fuse.
The
Neutral
(
Blue
) wire
connects to the left-most
neutral (N) terminal.
The
Earth
(
Green and Yellow
)
wire connects to the central,
top most earthed (
E
) terminal.
Warning
:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same identical rating as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualified electrician. Please note after replacing the fuse, ensure that the cover is
correctly fitted back onto the plug. Never attempt to run the appliance if the plug
does not have a cover. If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed to prevent it
from engaging into a socket. If the supply cord is damaged it must be replaced by a
service agent or a similarly qualified person.