7
Voltage Selector
For use in the U.S.A., the voltage selector switch should be placed in
the 125 volt position. For use in several countries overseas, the
voltage selector may need to be placed in the 250 volt position.
Confirm the voltage available at each overseas location before using
the appliance.
IMPORTANT:
For connection to a 250 volt supply, use an attachment
plug adapter (not included) of the proper configuration for the power
supply receptacle.
DRYER SETTINGS
The dryer can be set to the High or Low heat / air speed settings.
For your reference, the settings can be used for the following
instances:
High
Removing excess moisture from the hair.
Straightening coarse textured hair.
Fast drying.
Low
General purpose styling.
Smoothing medium — fine textured hair.
Heating hair set with velcro rollers.
Cool Shot Button
For longer lasting styles, press for a shot of cool air. The Cool Shot
feature operates only while the Cool Shot Button is held down. When
it is released, the dryer will return to normal operation.
Dual Voltage Switch
To change the voltage, use a pen
to move the switch to correspond
to voltage of the country. Be
certain the appliance is unplugged.
The 125-volt position is used for
the USA; several overseas countries
require 250 voltage. For 250-volt
connection, use a plug adaptor of
the proper configuration.
For countries overseas, use a pen
to switch to the corresponding
voltage of the country.
AC1875THD.qxd 9/18/2003 4:12 PM Page 7
