Instruction Manual
–
V6.19
GYROTORK DUAL version
- 30 -
3.
Channels tab
Display details of the sensor memory data and the present settings of all input and output signals.
4.
Factory configuration
Re-load the factory setup
5.
Reset of the Gyrotork
From the Version V6.18 on, you can reset your Gyrotork when you press the ON/OFF button
XIII.
ASSOCIATED PRODUCTS
1.
Acquisition software
The Gyrotork is delivered with the data acquisition Sofware Caligraph. It displays the curve of your
test in real time with up to 4 calculations and enables you to compare curves and export them in
personalized test reports.
For more information about the Software Caligraph, click on the HELP icon in the software and you
will download the manual.
2.
Interface Cables
Several interface cables can be used with a GYROTORK torque gauge:
External pedal: allows simulation of a keyboard button
Cable for external contact: allows torque calculation from closing /opening of contact (equipped with
male-female plugs).
Linking cable for a STENTOR motorized test stand allows you to stop the stand in accordance with a
condition defined by GYROTORK torque gauge.
Cable for an analogue link (with male-female plugs): links your gauge to another system
Cable for a RS232 link: connect your gauge to a computer using the RS232 output
Multifunction cable: STENTOR test stand control and RS232 link
