11- BELLOW (from the tub)
•
Remove the front panel. ( figure 3, 4, 5 )
•
Remove the spring clamp that fixes the bellows to the tub cover.
•
Pull off the bellows. ( When remounting, the bellows holes should look at the
lower part of the tub cover ).
12- POLY-V BELT
•
Remove the back cover.
•
Poly-V belt is pulled off while turning the
pulley. ( Figure 6)
•
Clean the pulley before reassembly.
13- PULLEY
•
Remove the back cover.
•
Remove the poly-V belt. ( Figure 6 )
•
Remove the bolt that connects the pulley
to the tub shaft. ( Figure 6)
•
Pull off the pulley from the tub shaft.
•
Pulley bolt can not be used for the
second time, use a new bolt during reassembly.
Figure 6
14- DRUM GROUP
•
Remove the front panel. ( Figure 3, 4, 5 )
•
Remove the tub cover.
•
Remove the rear cover.
•
Pulley is disassembled. ( Figure 6)
•
Drum is pulled off the tub.
15- MOTOR
•
Remove the back cover.
•
Motor socket is unplugged from the motor.
•
Poly-V belt is removed. ( Figure 6)
•
Remove the bolt that attaches the motor to the tub.
•
Motor is released from the motor fixture rubber.
