Figure 5
•
Pull down the front panel and release from the fixtures on the body.
8- HINGE
•
Remove the front door.
•
Remove the bellow clamp that attaches the bellow to the front panel.
•
Remove the bellow.
•
Remove the two screws that connect the hinge to the front panel. ( Figure 1c )
9- LOWER COUNTER WEIGHT AND TUB COVER
•
Remove the front panel. ( figure 3, 4, 5 )
•
Remove the lower counter weight fixture screws and pull off the counter
weight.
•
Tub cover is assembled with 12 clips to the tub. Remove them and take out
the tub cover.
10- TUB SEAL
•
Remove the front panel. ( figure 3, 4, 5 )
•
Remove the lower counterweight.
•
Remove the tub cover.
•
Tub cover is pulled off and turned upside down.
•
Tub seal is removed. ( When remounting, the tub seal, assemblying mark on
tub should match the corresponding mark on the tub cover )
